Sonos® Digital Music System
ZonePlayer ZP80
Setup Guide Installatiehandleiding Installationshandbok Guide d'Installation
Guida all'installazione Installationshandbuch Guía de configuración
Sonos® ZonePlayer ZP80
Setup Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installationshandbuch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Installatiehandleiding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Installationshandbok . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Guide d’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Guía de configuración . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Guida all’installazione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Contents
ii
Sonos ZonePlayer ZP80
Regulation Information
Europe
This product complies with the requirements of the R&TTE Directive (1999/5/ED). A copy of the full
Declaration of Conformance may be obtained at http://eu.sonos.com.
Attention In France, operation is limited to indoor use within the band 2.454-2.4835 GHz.
(Attention. En France, l’utilisation en intérieur est limitée à la bande de fréquences 2,454-2,4835 GHz.)
USA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
•
Consult the dealer or an experienced audio technician for help. Modifications not expressly ap-
proved by the manufacturer may void the user's authority to operate the equipment under FCC
rules.
Canada
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Industry Canada
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not
emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable
RF Exposure Requirements
To comply with FCC and EU exposure essential requirements, a minimum separation distance of 20cm (8
inches) is required between the equipment and the body of the user or nearby persons.
Recycling Information
This symbol on the product or on its packaging indicates that this product shall not be treated as household
waste. Instead please deliver it to the applicable collection point for the recycling of electrical and electronic
equipment. By recycling this product correctly, you will help conserve natural resources and prevent
potential negative environmental consequences. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or the shop where you
purchased the product.
2
Sonos ZonePlayer ZP80 Setup Guide
The ZonePlayer ZP80
The ZonePlayer ZP80 is designed to be used with an external amplifier. It contains both analog
and digital outputs so that you can easily connect it to your existing audio equipment.
•
•
•
•
Use a ZonePlayer ZP80 to create a music zone in a room where you already have an am-
plifier, such as your home theater system or the stereo system in your family room.
Use a ZonePlayer ZP80 to create a music zone in your home office where you already
have a computer or a pair of powered speakers.
Use a ZonePlayer ZP80 if you have a distributed audio system that is driven from an am-
plifier in one central location with speaker wires home-run to this central location.
Use a ZonePlayer ZP80 to extend the wireless range of your Sonos® Digital Music System.
All ZonePlayers, including the ZP80, can be used as wireless extenders by using the Hid-
den Zone feature. For more information on this feature, you can go to the online help sys-
tem included with your Desktop Controller software.
Your Computer Network
To play the digital music files stored on your computer, your computer network must meet the
following requirements:
Network requirements
•
You must have an Ethernet network interface connection in your computer. If you do not
have one, you will need to buy and install a Network Interface Card (NIC) before proceed-
ing.
•
•
DSL/cable modem, or LAN-based, high-speed Internet connection.
If you currently have a cable or DSL modem connected directly to your computer, you
should install a router between your modem and your computer to enhance your
computer’s security, and to share the Internet connection with your Sonos Digital Music
System and other devices. If you do not have a router, you should purchase and install
one before proceeding.
Note: Your network must have a high-speed Internet connection, as the Sonos
Digital Music System is designed to provide you with online software updates. Your
Sonos system must be registered to receive these updates, so be sure to register
during the setup process. We do not share your e-mail address with other
companies.
3
Sonos ZonePlayer ZP80 Setup Guide
Compatible operating systems
•
•
•
Windows® XP, including Windows® XP Media Center
Windows® 2000
Macintosh® OS X, version 10.3 or later
For additional information
•
•
•
•
To access the online help system included with your software, select Sonos System Help
from the Help menu.
www.sonos.com/support and click .FAQs.
For the latest Sonos Digital Music System product news, go to http://www.sonos.com.
Technical support
•
Web site
For help with troubleshooting and support issues, visit our Web site at
Questions (FAQ) pages, or request assistance.
•
Telephone
correct telephone number for your country.
4
Sonos ZonePlayer ZP80 Setup Guide
1-2-3 Setup
Note: The first ZonePlayer you install must connect to your home network using a
standard Ethernet cable (supplied). If you should experience any difficulty during
the setup process, please go to www.sonos.com/support for additional help.
IF you are setting up a new Sonos system
Attach the power cord and plug in the ZonePlayer ZP80.
1
Connect a standard Ethernet cable (supplied) from either of the two (2) Ethernet switch
2
connectors on the back of your ZonePlayer ZP80 to an open port on your router (see A in
the diagram below). Do not connect the ZonePlayer directly to your cable or DSL modem
unless your modem has a built-in router.
•
If you have
structured (built-in)
wiring, connect the
Ethernet cable into a
live wall plate (see B
in the diagram).
•
If you don’t have an open port on your router, you can disconnect your computer from
the router and connect it to the ZonePlayer ZP80 instead. Then connect the ZonePlayer
5
Sonos ZonePlayer ZP80 Setup Guide
into the router port the computer was previously plugged into.
If your router has only 1
port or no unused
ports, go to
norouterport for
additional information.
Insert the Sonos System Setup CD-ROM (included with your ZonePlayer) and follow the
prompts to connect your ZonePlayer ZP80 and set up access to your music files.
3
For use with:
•
Windows XP, including Windows XP
Media Center
•
•
Windows 2000
Mac OS X
If your operating system is not one of these, go to
http://faq.sonos.com/nodcr for setup assistance.
Note: Firewall software such as Norton Internet Security™, McAfee™ Personal
Firewall, Windows® Service Pack 2, or Mac OS X built-in firewall, can block the
operation of your Sonos Desktop Controller software. During installation, you may
see prompts from your firewall software indicating that the Sonos application is
attempting to perform certain operations. You should always allow full access to
the Sonos application. You may also need to change the settings of your firewall
software to ensure that Windows file sharing is not blocked. Please go to our Web
6
Sonos ZonePlayer ZP80 Setup Guide
Plug your Sonos Controller into the power
adapter and follow the prompts on the
Controller’s screen to add it to your music
system. You can use the Controller while it is
charging.
Now that your Sonos system is set up, you can connect the ZonePlayer ZP80 to an external
amplifier such as your home theater or your computer (see "Using Line-Out" on page 7.)
IF you are adding to an existing Sonos system
Important: If you want to replace the wired ZonePlayer in your music system with a
ZonePlayer ZP80, first add the new ZonePlayer ZP80 to your music system (steps
below). You can then unplug the wired ZonePlayer, replace it with the ZP80, and
move the original ZonePlayer to a new location.
Attach the power cord and plug in the ZonePlayer ZP80.
1
If you are making a wired connection, connect a standard Ethernet cable. If you are making
a wireless connection, skip this step and continue.
2
Choose one of the following options:
3
•
System Settings→Add a ZonePlayer from the Music menu. Or,
•
Use the Desktop Controller software to add the ZonePlayer ZP80 to your music system by
selecting Zones→Set Up Zones→Add.
During the setup process, you will be asked
to press and release the Mute and Volume Up
buttons simultaneously on the ZonePlayer you are
adding to your music system.
Mute button
Volume Up button
Now you are ready to connect the ZonePlayer ZP80 to an external amplifier, such as your home
theater or computer (see "Using Line-Out" on page 7.)
7
Sonos ZonePlayer ZP80 Setup Guide
Using Line-Out
Use the ZonePlayer’s audio outputs to connect a home theater, computer, powered speakers, or
an amplifier to the ZonePlayer ZP80.
Connecting to a home theater or amplifier
For additional information on connecting audio devices, please go to our Web site at
1. If you have digital inputs on your home theater or amplifier, you can use either a TOSLINK
optical audio cable or a digital coaxial cable to connect the ZonePlayer ZP80’s digital output
to the digital input on the receiver.
If you have analog inputs on your home theater or amplifier, use a standard RCA audio cable to
connect the ZonePlayer ZP80’s analog audio output to the audio inputs on the receiver.
2. Select the proper input channel on the receiver.
Controlling the volume from your home theater or amplifier
To control the volume exclusively from your home theater or amplifier, you can change the line-
out level on this ZonePlayer to Fixed by selecting one of the following options:
•
•
Using the Sonos Controller, from the Music menu, select System Settings. Select Zone-
Player Settings, and use the scroll wheel to highlight the ZonePlayer attached to the
receiver. Select Line-Out Level, and choose Fixed.
Using the Desktop Controller software, select Set Up Zones from the Zones menu. Select
the ZonePlayer attached to the receiver, and then click Settings. Click the Line-Out tab,
and choose Fixed.
Note: When you change the line-out level to Fixed on your ZonePlayer ZP80, you
will not be able to adjust the volume or the equalization settings using your Sonos
Controller.
Controlling the volume from your Sonos system
1. Adjust your home theater or amplifier’s volume to typical listening volume.
2. If the line-out level on this ZonePlayer is not currently set to Variable, you will need to
change it:
•
Using the Sonos Controller, from the Music menu, select System Settings. Select Zone-
Player Settings, and use the scroll wheel to highlight the ZonePlayer attached to the
receiver. Select Line-Out Level, and choose Variable.
•
Using the Desktop Controller software, select Set Up Zones from the Zones menu. Select
8
Sonos ZonePlayer ZP80 Setup Guide
the ZonePlayer attached to the receiver, and then click Settings. Click the Line-Out tab,
and choose Variable.
3. Use the Sonos Controller to adjust the volume on your Sonos system so you can hear music.
This may be at the high end of the volume scale.
4. If desired, you can readjust the volume on your home theater system or amplifier so that
the volume range for the Controller falls within your typical listening range.
Connecting to a computer or powered speakers
•
If you are connecting to your computer: You will need a stereo mini to RCA Y-adapter audio
cable (one 1/8-inch stereo miniplug to dual RCA male connectors) to connect the Zone-
Player’s analog audio output to the computer’s audio input.
•
If you are connecting to powered speakers: You may need a Y-adapter audio cable (one
1/8-inch stereo miniplug to dual RCA male connectors) to connect the computer’s speak-
ers to the audio outputs on the ZonePlayer. If your speakers have a male 1/8-inch stereo
plug, you will need to attach a female-to-female coupler between the speaker plug and
the Y-adapter audio cable.
Using Line-In
You can easily stream an external source such as a CD player or portable music player through
your Sonos Digital Music System using the audio-in connections on your ZonePlayer. The device
will be automatically detected as soon as you plug it in.
1. Use a standard RCA cable to plug an external source like a CD player into the analog Audio
In connections on the back of your ZonePlayer ZP80.
•
If you are connecting a portable music player to the ZonePlayer ZP80, you will need a
1/8 inch mini-stereo to RCA audio cable instead. Plug the mini-stereo end into the porta-
ble device and the RCA end into the Audio In connection on the ZonePlayer.
2. Choose one of the following options:
•
From the Sonos Controller, select Line-In Sources from the Music menu. Click Setup to
select a source name for this device. Once setup is complete, simply select Line-In
Sources from the Music menu, and touch Play any time youwant to play music from this
device.
•
From the Desktop Controller software, select the Line-In tab from the Music Library.
Select Edit Name to select a source name for this device. Once setup is complete, simply
select Line-In Sources from the Music Library, and press Play Now any time you want
to play music from this device.
9
Sonos ZonePlayer ZP80 Setup Guide
A default (typical) line-in level is automatically assigned when you select a source name. If the
volume sounds too low, you can select a higher line level for this device. You may experience
clipping at higher volume levels if you set the level too high.
Line-in encoding settings
When you have line-in music sources attached to a ZonePlayer, line-in encoding determines
how the Sonos Digital Music System will encode the data coming in from these sources. For
multi-room audio, we recommend using the Compressed setting. For the highest quality sound,
you can select Uncompressed encoding, but this selection requires more network bandwidth
than compressed audio. For TV or DVD audio, we recommend using the Uncompressed setting.
Note: You will notice a delay when a line-in source is in use. When the
Uncompressed encoding setting is selected, this delay is significantly reduced.
Adding More Sonos Components
Note: Thick walls, 2.4 GHz cordless telephones, and the presence of other wireless
devices can interfere with or block the wireless network signals from your Sonos
Digital Music System. If you are experiencing difficulty, it is advisable to relocate the
ZonePlayer, change the wireless channel your music system is operating on, or
make a wired connection (Ethernet cable) either from your router to the ZonePlayer,
or from one ZonePlayer to another. For more information on wireless connections,
go to www.sonos.com/support.
Add a ZonePlayer
You can connect the ZonePlayer ZP80 using a wired or a wireless connection.
1. Connect to an external amplifier and plug in your ZonePlayer.
2. Choose one of the following options:
•
Using the Sonos Controller, select System Settings→Add a ZonePlayer from the Music
menu.
•
Using the Desktop Controller software, select Zones→Set Up Zones→Add.
Add a Controller
You should charge your new Sonos Controller when you remove it from the packaging. Plug it
into the power adapter, and then follow the Controller’s on-screen prompts to add it to your
music system (you can use the Controller while it is charging.)
10
Sonos ZonePlayer ZP80 Setup Guide
ZonePlayer ZP80 Front
Mute button
ZonePlayer
status
indicator
Volume up (+)
Volume down (-)
On/Off
Your Sonos Digital Music System is designed to be always
on; the system uses minimal electricity whenever it is not
playing music. To stop streaming music in all zones, you
can use the Pause All feature.
•
Using the Sonos Controller, select
Pause All from the Zone menu.
•
Using the Desktop Controller software,
select Pause All from the Play menu.
ZonePlayer status indicator
Indicates the current status of the ZonePlayer. When the
ZonePlayer is in normal operation, you can turn the white
status indicator light on and off. For additional
information, see the online help system included with
your Desktop Controller software.
•
Flashes white when powering up or
connecting to your Sonos Digital Music
System.
•
Solid white when powered up and
connected to your Sonos Digital Music
System (normal operation).
For a complete list of status indications, please go to
Mute button
To mute/unmute this ZonePlayer: Press the Mute
•
Lights solid green when sound is muted. button to mute or unmute this ZonePlayer.
•
Flashes green rapidly when household
mute or unmute is about to take place.
Flashes green slowly when ZonePlayer is
connecting to your music system.
To mute/unmute all ZonePlayers: Press and hold the
Mute button for 3 seconds to mute all ZonePlayers in your
household. Press and hold for 3 seconds to unmute all
ZonePlayers.
•
Volume up (+)
Press these buttons to adjust the volume up and down.
Volume down (-)
11
Sonos ZonePlayer ZP80 Setup Guide
Rear Panel Connectors
Ethernet switch connectors
AC power (mains)
input
TOSLINK
digital
audio out
Coaxial
digital
audio out
Analog audio in
Analog audio out
Ethernet switch connectors (2)
Use Category 5 Ethernet cable to connect to a router,
computer, or additional network device such as a
network-attached storage (NAS) device.
AC power (mains) input
(~100-240 V, 50-60 Hz)
Use the supplied power cord to connect to power outlet.
Analog audio in
Use a standard RCA audio cable to connect the audio
outputs from a separate audio component such as a CD
player, to the ZonePlayer’s analog audio inputs.
Analog audio out
(fixed/variable)
Use a standard RCA audio cable to connect the
ZonePlayer’s analog audio outputs to the audio inputs on
a separate audio component, such as an amplifier or your
home theater receiver.
TOSLINK™ digital audio out
Coaxial digital audio out
You can use a TOSLINK optical audio cable to connect the
ZonePlayer’s TOSLINK digital audio output to the audio
inputs on a separate audio component, such as an
amplifier or your home theater receiver.
You can use a digital coaxial cable to connect the
ZonePlayer’s coaxial digital audio output to the audio
inputs on a separate audio component, such as an
amplifier or your home theater receiver.
12
Sonos ZonePlayer ZP80 Setup Guide
Basic Troubleshooting
Warning: Under no circumstances should the product be repaired by anyone
other than an authorized Sonos repair center, as this will invalidate the
warranty. Please contact the Sonos Customer Service Center to locate an
authorized repair center in your area. Do not open the system as there is a risk of
electric shock.
If a problem occurs, you can try the troubleshooting suggestions listed below. If one of these
doesn’t remedy the problem, or you are not sure how to proceed, please contact the Sonos
Customer Service Center and we’ll be happy to help.
•
Web site
our Frequently Asked Questions (FAQ) pages, or request assistance.
•
Telephone
correct telephone number for your country.
ZonePlayer not detected during setup
A network problem may be preventing the ZonePlayer from associating with the Desktop
Controller software. If this is a wireless ZonePlayer, try moving the ZonePlayers closer together, or
wire the ZonePlayer temporarily to see if the problem is related to wireless interference.
If you encounter this message when installing the first wired ZonePlayer, you can try the steps
below to resolve this issue:
1. Check the firewall
Firewall software installed on the computer may be blocking the ports that Sonos uses to
operate. First, disable all your firewalls and try to connect again. If this resolves the problem, then
you should configure your firewall to work with the Sonos music system. You can go to our
problem, you can try step 2.
13
Sonos ZonePlayer ZP80 Setup Guide
2. Check the router
You can bypass your router’s switch to determine whether there are any router configuration
issues (note that the ZonePlayer and the computer still have Internet access in this
configuration):
•
•
•
Be sure that your cable/DSL modem is connected to the router’s WAN (Internet) port.
Temporarily remove any other components that are wired to your network.
Connect an Ethernet cable from the computer directly to the back of the ZonePlayer, and
then connect another Ethernet cable from the ZonePlayer directly to one of the LAN
ports on your router.
•
•
When you make a change to your network configuration, you may need to power cycle
the ZonePlayer by unplugging the power cord, and then plugging it back in.
If you are not using a router, see http://faq.sonos.com/norouter.
3. Check the wiring
Check the link/activity lights on both the router and the ZonePlayer. They should be green, and
there should be blinking activity lights.
•
•
If the green link lights are not lit, try connecting to a different port.
If the link lights still do not light, try connecting a different Ethernet cable.
If you are still experiencing problems, please contact the Sonos Customer Service Center.
14
Sonos ZonePlayer ZP80 Setup Guide
When adding the handheld Sonos Controller, it fails to detect the
ZonePlayer(s)
Wireless interference or a network problem may be preventing the Controller from joining your
Sonos Digital Music System.
1. Verify that this is not a DHCP or network problem.
•
Disconnect the Ethernet cables from the back of the ZonePlayer so that it is not connect-
ed to your network.
•
•
Unplug the ZonePlayer's power cord and then plug it back in.
Once the status indicator light stops blinking white, try adding your Controller again.
If it works, your router's DHCP server may have run out of available IP addresses to assign to the
browser’s address line (the IP address of your router may be different). Check the DHCP settings
and increase the number of IP addresses available in the DHCP scope.
If your Controller still does not recognize the ZonePlayer after completing this step, you can try
step 2.
2. Turn off any 2.4GHz cordless phones.
Some 2.4GHz cordless telephones can cause wireless interference. If turning off your 2.4GHz
cordless phone resolves the problem, you should consider switching to a 5.8Ghz or 900Mhz
phone (or change the wireless channel your Sonos system is operating on - see step 4 below.)
3. Put 108 Mbps wireless routers into 54 Mbps mode.
Sonos cannot function properly when a router is operating in "turbo" mode. In order to double
the speed from 54 Mbps to 108 Mbps, the router goes into a wide bandwidth mode which
utilizes most of the 2.4 GHz spectrum that the FCC has set aside for 802.11b/g devices. This
means that interference (RF noise) will occur with any other 2.4 GHz device that is not operating
on the same channel as the 108 Mbps device (usually channel 6). While it is possible to put all of
your wireless devices on channel 6, it is unwise. The devices will have to compete for available
bandwidth, and your entire Wi-Fi network will become sluggish and bogged down.
4. Change the wireless channel your Sonos system is operating on.
•
Using the Desktop Controller software for Windows: From the File menu, select Prefer-
ences. Click the Advanced tab, and then select another wireless channel from the Wire-
less Channel list.
•
Using the Desktop Controller software for Macintosh: From the Sonos menu, select Pref-
erences. Click the Advanced tab, and then select another wireless channel from the
Wireless Channel list.
It may take several seconds for the switch to take effect. If you have music playing, a short music
dropout will occur during the wireless channel change.
15
Sonos ZonePlayer ZP80 Setup Guide
Important Safety Information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your
ZonePlayers or Controllers.
7. Do not block any ventilation openings. Install in accordance with the manufacturer´s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
that produce heat.
9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
13. The Mains plug should be readily available to disconnect the equipment.
14. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
15. Do not expose apparatus to dripping or splashing and do not place objects filled with liquids,
such as vases, on the apparatus.
Warning: To avoid damage to speakers, turn off the external amplifier before
unplugging your ZonePlayer ZP80.
Installationshandbuch
Sonos ZonePlayer ZP80. Zur Verwendung mit dem Sonos Digital Music System.
ÄNDERUNGEN DER IN DIESEM DOKUMENT ENTHALTENEN INFORMATIONEN VORBEHALTEN. Die Inhalte des
vorliegenden Dokuments dürfen ohne schriftliche Genehmigung der Sonos, Inc. weder in elektronischer
oder mechanischer noch in anderer Form reproduziert oder übertragen werden. Dies gilt insbesondere für
die Erstellung von Fotokopien, die Aufzeichnung und die Speicherung in Informationssystemen oder
Computernetzwerken.
Sonos ist eine eingetragene Marke der Sonos, Inc. in den Vereinigten Staaten und eine Marke der Sonos, Inc.
in anderen Ländern. Sonosnet und alle Sonos-Logos sind Marken der Sonos, Inc. in den Vereinigten Staaten
und/oder anderen Ländern.
Alle weiteren in diesem Dokument genannten Produkte und Dienstleistungen sind gegebenenfalls Marken
oder Dienstleistungsmarken der jeweiligen Rechtsinhaber.
© 2004-2006 by Sonos, Inc. Alle Rechte vorbehalten.
Version: 060801
August 2006
18
Sonos ZonePlayer ZP80 – Installationshandbuch
Der ZonePlayer ZP80
Verwenden Sie den ZonePlayer ZP80 mit einem externen Verstärker. Über die analogen und
digitalen Ausgänge kann er problemlos an Ihr vorhandenes Audiosystem angeschlossen
werden.
•
Verwenden Sie einen ZonePlayer ZP80, um eine Musikzone in Räumen einzurichten, in
denen Sie bereits über einen Verstärker (z. B. ein Heimkino oder eine Stereoanlage) ver-
fügen.
•
•
Verwenden Sie einen ZonePlayer ZP80, um eine Musikzone in Ihrem Heimbüro einzu-
richten, in dem Sie über einen Computer oder Aktivlautsprecher verfügen.
Verwenden Sie einen ZonePlayer ZP80, wenn Sie über ein verteiltes Audiosystem mit
zentralem Verstärker verfügen, der mit den Lautsprechern innerhalb des Hauses verka-
belt ist.
•
Verwenden Sie einen ZonePlayer ZP80, um den Wireless-Bereich Ihres Sonos® Digital
Music Systems zu erweitern. Alle ZonePlayer, einschließlich des Modells ZP80, können
über die Funktion Ausgeblendete Zone als Wireless-Erweiterung eingesetzt werden.
Weitere Informationen zu dieser Funktion finden Sie in der Online-Hilfe Ihrer Desktop
Controller-Software.
Ihr Computernetzwerk
Um die auf Ihrem Computer gespeicherten digitalen Musikdateien wiedergeben zu können,
muss Ihr Computernetzwerk die folgenden Anforderungen erfüllen:
Netzwerkanforderungen
•
Ihr Computer muss über eine Ethernet-Netzwerkschnittstelle verfügen. Ist dies nicht der
Fall, muss zunächst eine Netzwerkkarte installiert werden.
•
•
DSL-/Kabelmodem oder LAN-basierte Hochgeschwindigkeits-Internetverbindung.
Falls ein DSL- oder Kabelmodem direkt an Ihren Computer angeschlossen ist, sollten Sie
einen Router zwischen Modem und Computer installieren, um die Sicherheit Ihres
Computers zu verbessern und die Internetverbindung mit Ihrem Sonos Digital Music
System und anderen Geräten zu teilen. Falls Sie keinen Router besitzen, sollten Sie einen
Router erwerben und installieren, bevor Sie fortfahren.
19
Sonos ZonePlayer ZP80 – Installationshandbuch
Hinweis: Ihr Netzwerk muss über eine Hochgeschwindigkeits-Internetverbindung
verfügen, da für Ihr Sonos Digital Music System Online-Software-Updates
bereitgestellt werden. Um diese Updates zu erhalten, müssen Sie das System
registrieren. Führen Sie daher bei der Einrichtung die erforderlichen
Registrierungsschritte aus. Ihre E-Mail-Adresse wird nicht an andere Unternehmen
weitergegeben.
Kompatible Betriebssysteme
•
•
•
Windows® XP, einschließlich Windows® XP Media Center
Windows® 2000
Macintosh® OS X, Version 10.3 oder höher
Weitere Informationen
•
•
•
•
Um die Online-Hilfe Ihrer Software aufzurufen, klicken Sie im Menü Hilfe auf Sonos-
Systemhilfe.
Antworten auf häufig gestellte oder auch ungewöhnliche Fragen finden Sie auf unsere
Produktneuheiten zu Ihrem Sonos Digital Music System finden Sie unter
http://www.sonos.com.
Technischer Support
•
Website
Unterstützung bei der Behandlung von Fehlern und anderen Problemen erhalten Sie auf
greifen Sie auf Benutzerforen oder eine Liste mit häufig gestellten Fragen zu und haben
die Möglichkeit, selbst eine Frage zu stellen oder Unterstützung anzufordern.
•
Telefonischer Support
Telefonischer Support, um die richtige Telefonnummer für Ihr Land zu finden.
20
Sonos ZonePlayer ZP80 – Installationshandbuch
Installationsschritte
Hinweis: Der erste ZonePlayer, den Sie installieren, muss über ein standardmäßiges
Ethernet-Kabel (im Lieferumfang enthalten) mit Ihrem Heimnetzwerk verbunden
werden. Falls während des Setupvorgangs Probleme auftreten, erhalten Sie Hilfe
Einrichten eines neuen Sonos-Systems
Verbinden Sie das Netzkabel mit dem ZonePlayer ZP80 und schließen Sie ihn an den Strom
an.
1
Verbinden Sie mithilfe des standardmäßigen Ethernet-Kabels (im Lieferumfang enthalten)
2
einen der zwei (2) Ethernet-Anschlüsse auf der Rückseite des ZonePlayers ZP80 mit einem
freien Anschluss an Ihrem Router (siehe Punkt A in der nachstehenden Abbildung).
Verbinden Sie den ZonePlayer nicht direkt mit Ihrem Kabel- oder DSL-Modem, es sei denn,
dieses verfügt über einen integrierten Router.
•
re Anweisungen.
Wenn Sie über eine
integrierte
Hausverkabelung
verfügen, können Sie
das Ethernet-Kabel
mit einem
Wandanschluss
verbinden (siehe
Punkt B in der
Abbildung).
•
Wenn alle Anschlüsse Ihres Routers belegt sind, können Sie Ihren Computer vom Router
trennen und stattdessen an den ZonePlayer ZP80 anschließen. Verbinden Sie anschlie-
ßend den ZonePlayer mit dem Router-Anschluss, an den zuvor der Computer ange-
schlossen war.
|
